- Commercial-grade planters
- Suitable for indoor or outdoor use
- Fiberglass liner with wood cladding
- 1-5/8” drain holes available upon request
- A broad range of standard sizes
Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options. Note that not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.
Tournesol’s container irrigation systems are the best in the business, and one of the values of working with Tournesol. Learn more about the systems details below.
Speak to a Tournesol Advisor for help selecting irrigation systems for your next project.
Square and rectangular planters can be connected end-to-end to create linear runs. “Scoops” lower adjacent planter walls allowing them to hide beneath the soil surface, creating a continuous planting along the top. Connector kits to gang planters together are available.
Unique Scoops such as those placed to create t-shapes or corners are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique scoops for your project.
Recessed casters discreetly provide mobility and are available as an option for many of our planter collections. Planters receiving casters are built with reinforced raised bottoms, so that casters are hidden under skirted planter walls. Tournesol installs commercial-grade swiveling casters calculated to support the total weight of the filled planter. Adding casters adds .5” to height and reduces soil depth by 5”, please take this into consideration when selecting your planter height.
Casters are not offered for very large or very narrow planters where weight or tipping hazard can present a challenge. Unique caster configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.
Need it watertight? Specify TourneSeal, our waterproofing solution. This is highly recommended for planters that will not have drain holes. We apply specific coatings to our FRP, GFRC, and Steel products, if requested. Follow our warranty requirements and perform a field test for watertightness after installation, before filling with media.
Whether installing planters on-structure or at grade, thoughtful attention to drainage will keep water and debris from collecting on non-permeable surfaces. We manufacture our GFRC and Steel planters standard with drain holes. For no additional cost, we can produce these planters without holes. Our FRP planters are manufactured without drain holes so they can be drilled as required in the field. We can add drain holes to FRP planters using our standard drain hole configuration at no additional cost. See chart for details.
Unique drainage configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.
Tie Downs are available for large planters to hold trees in place. These are available for planters in all our materials. Ties are added inside planters at the midpoint. Square planters use four, one in each corner, and round planters use three, spaced equally around the inner circumference.