Wilshire Planters, GFRC with Greenscreen Trellis

Tournesol’s container irrigation systems are the best in the business, and one of the values of working with Tournesol. Learn more about the systems details below. 

Speak to a Tournesol Advisor for help selecting irrigation systems for your next project.

Need it watertight? Specify TourneSeal, our waterproofing solution. This is highly recommended for planters that will not have drain holes. We apply specific coatings to our FRP, GFRC, and Steel products, if requested. Follow our warranty requirements and perform a field test for watertightness after installation, before filling with media.

Whether installing planters on-structure or at grade, thoughtful attention to drainage will keep water and debris from collecting on non-permeable surfaces. We manufacture our GFRC and Steel planters standard with drain holes. For no additional cost, we can produce these planters without holes. Our FRP planters are manufactured without drain holes so they can be drilled as required in the field. We can add drain holes to FRP planters using our standard drain hole configuration at no additional cost. See chart for details.

Unique drainage configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

Capture runoff from drain holes to prevent surface staining. Available in GFRC and FRP with matching finishes. Review the product details below.

Speak to a Tournesol Advisor for help selecting saucers for your next project.

Add pockets to accommodate lighting, audio, power, and data. View our Fixture Compatibility Chart to use a Standard Accessory Pocket. Find out more in our guide below. Connect with a Tournesol Advisor for assistance.

Custom Accessory Pockets are available for fixtures not appearing on the compatibility chart. Speak to a Tournesol Advisor about how we can accommodate a specific need for your project.

Moving large planters on the job site can be challenging without the right equipment. By adding lift channels, you can safely and quickly move planters on site. We have two configurations for lift channels, pallet jack or forklift.

Unique lift channels are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

When specifying an FRP planter that won’t have full basal support after installation, such as installing on pedestals, it is recommended to add a bottom reinforcement to reduce damage to a loaded planter. This is also recommended for planters that will be anchored to the underlying surface.

Tournesol offers a broad range of standard colors for GFRC, FRP, and Powder-Coat, but we also offer custom colors depending on product and volume. Contact a Tournesol Advisor to discuss your custom color needs.

Anchor Plate

Speak to a Tournesol Advisor about specifying unique options for your project.