Wilshire Planter, FRP Square

Scoops

Square and rectangular planters can be connected end-to-end to create linear runs. “Scoops” lower adjacent planter walls allowing them to hide beneath the soil surface, creating a continuous planting along the top. Connector kits to gang planters together are available.

Unique Scoops such as those placed to create t-shapes or corners are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique scoops for your project.

Accessory Pockets

Add pockets to accommodate lighting, audio, power, and data. View our Fixture Compatibility Chart to use a Standard Accessory Pocket. Find out more in our guide below. Connect with a Tournesol Advisor for assistance.

Custom Accessory Pockets are available for fixtures not appearing on the compatibility chart. Speak to a Tournesol Advisor about how we can accommodate a specific need for your project.

Casters

Recessed casters discreetly provide mobility and are available as an option for many of our planter collections. Planters receiving casters are built with reinforced raised bottoms, so that casters are hidden under skirted planter walls. Tournesol installs commercial-grade swiveling casters calculated to support the total weight of the filled planter. Adding casters adds .5” to height and reduces soil depth by 5”, please take this into consideration when selecting your planter height.

Casters are not offered for very large or very narrow planters where weight or tipping hazard can present a challenge. Unique caster configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

False Bottom

Reduce soil volume and weight in planters by adding false bottoms. False bottoms are 24" below the top of the planter unless otherwise specified.

If other depth is needed, please contact your Advisor.

Bottom Reinforcement

When specifying an FRP planter that won’t have full basal support after installation, such as installing on pedestals, it is recommended to add a bottom reinforcement to reduce damage to a loaded planter. This is also recommended for planters that will be anchored to the underlying surface.

Anchor Plate

Speak to a Tournesol Advisor about specifying unique options for your project.

Lift Channels

Moving large planters on the job site can be challenging without the right equipment. By adding lift channels, you can safely and quickly move planters on site. We have two configurations for lift channels, pallet jack or forklift.

Unique lift channels are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

Tie Downs

Tie Downs are available for large planters to hold trees in place. These are available for planters in all our materials. Ties are added inside planters at the midpoint. Square planters use four, one in each corner, and round planters use three, spaced equally around the inner circumference.

TourneSeal

Need it watertight? Specify TourneSeal, our waterproofing solution. This is highly recommended for planters that will not have drain holes. We apply specific coatings to our FRP, and GFRC products, if requested. Follow our warranty requirements and perform a field test for watertightness after installation, before filling with media.

Custom Color

Tournesol offers a broad range of standard colors for GFRC, FRP, and Powder-Coat, but we also offer custom colors depending on product and volume. Contact a Tournesol Advisor to discuss your custom color needs.