Skip to main content
Edit Page Style Guide Control Panel

Features

  • Lightweight fiberglass
  • Available in three standard textures
  • Drain holes upon request or installed in the field

Available Materials

FRP Fiberglass

FRP-Color-Wheel

FRP Complete Swatch Book

FRP Complete Swatch Book


Our FRP Swatch Brochure shows a representation of our FRP Fiberglass paint colors & textures. We offer a variety of colors in three textures with a semi-gloss finish.  

Order Samples

Citron

Smooth

Citron_RS

Rough Stucco

Citron_OP

Orange Peel

Textures

Order Samples

CARIBBEAN

FRP - Fiberglass

Caribbean

Smooth

Caribbean_RS

Rough Stucco

Caribbean_OP

Orange Peel

Textures

Order Samples

Sage

Smooth

Sage_RS

Rough Stucco

Sage_OP

Orange Peel

Textures

Order Samples

Tomato

Smooth

Tomato_RS

Rough Stucco

Tomato_OP

Orange Peel

Textures

Order Samples

Royalty

Smooth

Royalty_RS

Rough Stucco

Royalty_OP

Orange Peel

Textures

Order Samples

Basil

Smooth

Basil_RS

Rough Stucco

Basil_OP

Orange Peel

* Textures shown in Shark

Order Samples

Pitch

Smooth

Pitch_RS

Rough Stucco

Pitch_OP

Orange Peel

Textures

Order Samples

Shadow

Smooth

Shadow_RS

Rough Stucco

Shadow_OP

Orange Peel

Textures

Order Samples

Shark

Smooth

Shark_RS

Rough Stucco

Shark_OP

Orange Peel

Textures

Order Samples

Puddle

Smooth

Puddle_RS

Rough Stucco

Puddle_OP

Orange Peel

Textures

Order Samples

Smoke

Smooth

Smoke_RS

Rough Stucco

Smoke_OP

Orange Peel

Textures

Order Samples

White

Smooth

White_RS

Rough Stucco

White_OP

Orange Peel

Textures

Order Samples

CHOCOLATE

FRP - Fiberglass

Chocolate

Smooth

Chocolate_RS

Rough Stucco

Chocolate_OP

Orange Peel

Textures

Order Samples

TERRA COTTA

FRP - Fiberglass

Terra-Cotta

Smooth

Terra-Cotta_RS

Rough Stucco

Terra-Cotta_OP

Orange Peel

Textures

Order Samples

Reed

Smooth

Reed_RS

Rough Stucco

Reed_OP

Orange Peel

Textures

Order Samples

IRON - DESIGNER COLOR

FRP - Fiberglass

Iron

Smooth

Iron_RS

Rough Stucco

Iron_OP

Orange Peel

Textures

Order Samples

BRONZE - DESIGNER COLOR

FRP - Fiberglass

Bronze

Smooth

Bronze_RS

Rough Stucco

Bronze_OP

Orange Peel

Textures

Order Samples

SILVER - DESIGNER COLOR

FRP - Fiberglass

Silver

Smooth

Silver_RS

Rough Stucco

Silver_OP

Orange Peel

Textures

Order Samples


Product Options

Tournesol’s products are made-to-order. To easily add features to our planters, check our menu of standard options. Note that not all options are available for all products; we also have capabilities beyond the listed options. For something off-menu, speak to a Tournesol Advisor.

options-change-dim

Change in Dimension / Angled Length Modification

Don’t see the size you’re looking for? Many of our planters can be ordered with a change in one dimension as a standard option.

Modifications to more than one dimension are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique sizes for your project.

Talk to an Advisor

options-irrigation

Irrigation Systems

Tournesol’s container irrigation systems are the best in the business, and one of the values of working with Tournesol. Learn more about the systems details below. 

Speak to a Tournesol Advisor for help selecting irrigation systems for your next project.

Irrigation, Drainage & Root Control

options-casters

Casters

Recessed casters discreetly provide mobility and are available as an option for many of our planter collections. Planters receiving casters are built with reinforced raised bottoms, so that casters are hidden under skirted planter walls. Tournesol installs commercial-grade swiveling casters calculated to support the total weight of the filled planter. Adding casters adds .5” to height and reduces soil depth by 5”, please take this into consideration when selecting your planter height.

Casters are not offered for very large or very narrow planters where weight or tipping hazard can present a challenge. Unique caster configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

Talk to an Advisor

options-sealant

TourneSeal

Need it watertight? Specify TourneSeal, our waterproofing solution. This is highly recommended for planters that will not have drain holes. We apply specific coatings to our FRP, GFRC, and Steel products, if requested. Follow our warranty requirements and perform a field test for watertightness after installation, before filling with media.

Talk to an Advisor

options-drainage

Drain Holes

Whether installing planters on-structure or at grade, thoughtful attention to drainage will keep water and debris from collecting on non-permeable surfaces. We manufacture our GFRC and Steel planters standard with drain holes. For no additional cost, we can produce these planters without holes. Our FRP planters are manufactured without drain holes so they can be drilled as required in the field. We can add drain holes to FRP planters using our standard drain hole configuration at no additional cost. See chart for details.

Unique drainage configurations are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

Drainage Configuration Chart

options-false-bottom

False Bottom

Reduce soil volume and weight in taller planters by adding false bottoms. The false bottom option provides a soil depth of 18”.

If other soil depths are needed, we can customize false bottoms to fit your project. We can also fill space with our lightweight VersiCell panels. Contact a Tournesol Advisor for help with your project.

Talk to an Advisor 

options-tiedowns

Tie Downs

Tie Downs are available for large planters to hold trees in place. These are available for planters in all our materials. Ties are added inside planters at the midpoint. Square planters use four, one in each corner, and round planters use three, spaced equally around the inner circumference. 

Talk to an Advisor

options-reinforced-bottom

Bottom Reinforcement

When specifying an FRP planter that won’t have full basal support after installation, such as installing on pedestals, it is recommended to add a bottom reinforcement to reduce damage to a loaded planter. This is also recommended for planters that will be anchored to the underlying surface.

Talk to an Advisor

options-saucer

Matching Saucer

Capture runoff from drain holes to prevent surface staining. Available in GFRC and FRP with matching finishes. Review the product details below.

Speak to a Tournesol Advisor for help selecting saucers for your next project.

Skirted Planter Saucers

options-lift-channels

Lift Channels

Moving large planters on the job site can be challenging without the right equipment. By adding lift channels, you can safely and quickly move planters on site. We have two configurations for lift channels, pallet jack or forklift.

Unique lift channels are available but outside of standard options. Speak to a Tournesol Advisor about specifying unique options for your project.

Talk to an Advisor

options-custom-color

Custom Color

Tournesol offers a broad range of standard colors for GFRC, FRP, and Powder-Coat, but we also offer custom colors depending on product and volume. Contact a Tournesol Advisor to discuss your custom color needs.

Talk to an Advisor

Sign up for early updates

Enter your email to opt-in and receive the latest product news and event announcements.


Greenscreen Joins Tournesol

Welcome to Tournesol! Greenscreen® was acquired by Tournesol, enabling a mutual expansion of product offerings with integrated and innovative solutions for green infrastructure and urban greening.